Site Overlay


To add an Ethernet device to the system the following function has to be called: If we have more than one button, we can put these structures in an array. The configfs must then be mounted to a dedicated mountpoint. In such cases a custom initialization is needed. The configuration of the SMC for a flash device needs three steps.

Uploader: Bagore
Date Added: 9 August 2007
File Size: 64.56 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 57577
Price: Free* [*Free Regsitration Required]

To add an Ethernet device to the system the following function has to be called: Its main purpose is to turn something on or off. On most systems, this is already done by the startup scripts.

linux gpio driver_百度文库

This is similar to the kernel boot command line. This means only if a GPIO has changed its status since the last read. To get the Ethernet address the tags have pinux be parsed. It is important ypio place the partition boundaries on a multiple of an erase sector size. Input visibility and output control. This ensures a safe operation, portability and easier handling of the underlying hardware. This should rather be done in the board code than in the original code, which would result in an incompatibility with already existing boards.


If we have more than one button, we can linyx these structures in an array. The number of the gpio device may be different if other gpio devices have been created before.

The oinux loader has to be placed at the beginning of the flash in order to boot. In most cases, these modules are already selected pa7 the kernel configuration and are thus present. The information in this document is provided in connection with Atmel products. Use the —n flag to set the non-blocking method. To read out the four bytes, use these commands in following constellation: The driver uses the Linux input system to deliver mouse events to user-space. It will also be used to print the boot messages.

It registers itself with configfs and is visible as sudirectory gpio. An entry like the following is needed: Possible values are defined as macros.

View detail for AVR32744: 32-bit AVR AP7 Linux Custom Board Support

The remaining three fields bleft, bmiddle and bright are the mouse buttons. For instance, if we select the timer trigger, two more attributes are available: It’s a linyx project which helps to repair anything.


Atmel does not make any commitment to update the information contained herein. Create a valid Linux kernel configuration for the custom board. The rest of the flash can be used to store the root file system or other data.

Each bit in the mask represents a channel but not all channels may be available on the device. A GPIO should be configured in the board setup code. A check by running dmesg can help to find the right device.

To build the module, edit the Makefile and change the path settings to make it point to your Linux kernel sources.

This application note describes an example adaptor card for the STK development board. Time in milliseconds during which the LED should be turned on? These parameters should be set in the board setup code if needed.