Site Overlay

DAHDI TELEPHONY DRIVER

In the module settings you can define which kernel modules should be loaded for your cards. Specify the kernel module used by the installed analogue hardware. This enables listening for the beep-beep busy pattern and then hanging up the call. After making changes here, make sure you press the “Apply Config” button at the top. From here, the only thing you would normally change is the group that analog port belongs to. You should only use this option if you know what you are doing with DAHDI, know what each option does and know how it interacts with all the other options. Here is where you can see all Digital Cards on the system.

Uploader: Shaktim
Date Added: 15 September 2011
File Size: 50.43 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 63154
Price: Free* [*Free Regsitration Required]

Lastly we will setup the GSM card as group 2.

Note that these parameters do not apply to hardware echo cancellers. Now that you have setup your cards, make sure you go into the Trunks module in your PBX and create your trunk. Clicking on this section will bring up all the modules that we autoload. The settings are dynamic depending on the type of card such teelephony T1 versus BRI.

You should only use this option if you know what you are doing with DAHDI, know what each option does and know how it interacts with all the other options. In some cases this option can make echo worse! Click on the Edit button dahdk to each digital card span.

Index of /pub/telephony/dahdi-linux-complete

Also consult the manufacturer if you’re outside of North America because you’ll need to change the settings in this section. Specify the kernel module used by the installed analogue hardware. Specify telehony the channel should be answered immediately or if the simple switch should provide dial tone, read digits, etc. You will see in the example below we moved zaphfc to the top. Enabling echo training will cause DAHDI to briefly mute the channel, send an impulse and use the impulse response to pre-train the echo canceller so it can start out with a much telepbony idea of the actual echo.

  MODEM ATECH DRIVER

This enables listening for the beep-beep busy pattern and then hanging up the call. The values are in db decibels. In our example we are going to set up our the Digium T1 cards Port 1 as group 0.

You can also set up ranges of channels on your T1 to dxhdi different groups for different companies or divisions. In the module settings you can define which kernel modules should be loaded for your cards.

Whether or not dahdk enable call waiting on internal extensions.

In General Settings, you can define all the different information as it relates to your specific carrier setup, such as signaling and switch type. From here, the only thing you would normally change is the group that analog port belongs to.

The port on the card will not work until you click on “Edit” and save the settings.

From here you can disable any modules that you do not need if you want. A fter making changes here, make sure you press the “Apply Config” button at the top.

You can pick and choose which groups to put your ports of a card under. A t tachments 57 Page History. Different models of cards have different kernel module settings and you should only change these if instructed by the dshdi of your card or support. The Modprobe Settings let you control the Linux systems used to manage drivers.

  HP NX6310 VGA DRIVER DOWNLOAD

In our example we removed a handful of modules by un-checking them and pressing the save button. By default we set all the common cards we configure but you can add custom entries here or disable or move the order of how the modules are loaded. Most people never need to change or adjust these settings, but if any changes you would normally make to DAHDI configs are needed, you can adjust or add them here.

Index of /pub/telephony/dahdi-linux-complete

This is not usually needed except rare circumstances. Here is where you can see all Digital Cards on the telepgony. The higher the number, the more time will be needed to hang up a channel, but a higher number will also reduce the probability that you will get random hangups.

When creating a trunk, you will be given a drop down of which group you want that trunk to be paired with based on what groups you created in this module. Note that if any of your DAHDI cards have hardware echo cancellers, then this setting only turns them on and off.